亚洲最黄视频-亚洲最大在线-亚洲最大网址-亚洲最大色网-亚洲最大色视频-亚洲最大情网站在线观看

I-beam

I-beam

DESCRIPTION

I-beam also known as the steel beam (English name Universal Beam), is a cross-section of the shape of the long strip of steel. I-beam ordinary I-beam and light I-beam. Sectional shape is I-shaped stee


DETAILS

I-beam also known as the steel beam (English name Universal Beam), is a cross-section of the shape of the long strip of steel. I-beam ordinary I-beam and light I-beam. Sectional shape is I-shaped steel.
The basic difference
I-beam is divided into ordinary I-beam, light I-beam, low-alloy light I-beam three.
Common I-beam, light I-flange flange section is by thickening the web section, the outer thin; H-beam: HW HM HN HEA HEB HEM and other steel flange is equal section
Ordinary I-beam, light I-beam has formed a national standard, the general I # 10 I-beam is equivalent to the international I100 (for example, 10 # channel equivalent to channel U100) (because of the implementation of different standards, causing them Specifications have subtle differences)
H-shaped I-beam also known as wide-flanged steel, HW HM HN from the European standards, HEB is the German standard I-beam, HW, HN I-beam has been widely used and produced in our country. The HEA HEB HEM is seen on many German design drawings and is hard to buy on the domestic market. In the domestic steel structure project, if the amount of less you can use such specifications of steel welded splicing. The large amount of words, usually consider the use of mechanical properties and the equivalent of HW, HN steel instead.
HW I-beam is mainly used in reinforced concrete frame column in the steel column, also known as the rigid steel column; in the steel structure is mainly used for column
The ratio of height of HM section and flange width is approximately 1.33 ~ 1.75. It is mainly used as steel frame column in steel structure as frame beam in frame structure subjected to dynamic load. For example: Equipment platform
HN steel height and flange width ratio greater than or equal to 2; mainly used for the beam
The use of ordinary H-beam is equivalent to HN steel;
◆ I-shaped steel, whether ordinary or light, due to the cross-sectional size are relatively high, narrow, so the cross section of the two spindles of the larger moment of inertia, it can only be used directly in its web plane bending Or form a grid-like force member. Axial compression member or in the plane perpendicular to the web and bending components are not suitable, which makes it in the application of a great extent.
◆ H-beam belongs to the efficient economic profile (other cold-formed thin-walled section steel, profiled steel plate, etc.), because of the rational shape of the cross-section, they can make the steel higher performance, improve the carrying capacity. Different from the common type is the h-beam flange widened, and the inner and outer surfaces are usually parallel, so that easy to use high-strength bolts and other components connected. Its size constitutes a series of reasonable, model complete, easy to design selection.
The scope of application
Ordinary I-beam, light I-beam, due to the cross-sectional size are relatively high, narrow, so the main two sections of the moment of inertia of the main difference between the larger, which makes it in the scope of application has a great limitation. The use of I-beam should be based on the requirements of design drawings for selection.
Size design
H-beam is a high-efficiency economical profiled steel (there are other cold-formed thin-walled section steel, profiled steel, etc.), due to the rational shape of the cross-section, they can make the steel higher performance, improve the ability to bear. Unlike conventional I-beams, the flange of the H-section is widened and the inner and outer surfaces are generally parallel so that it can be easily connected to other components using high-strength bolts. Its size constitutes a reasonable model complete, easy to design selection.
In the structural design of the selection of steel should be based on its mechanical properties, chemical properties, solderability, structural dimensions, such as the choice of reasonable use of I-beam.
Welding process
H-beam flange is equal thickness, there are rolling cross-section, but also by the combination of three plate welding cross-section. Common I-beam are rolling cross-section, due to poor production technology, flange within the slope of 1:10. H-beam rolling is different from ordinary I-beam only a set of horizontal roller, because of its wide flange and no slope (or slope is very small), it is necessary to add a group of vertical roll roll at the same time, therefore , The rolling process and equipment are more complex than ordinary rolling mill. The maximum domestic production of H-beam can be rolled to a height of 800mm, which exceeds the welded cross-section.
Narrow flange h beam for beam or bending members, and wide flange h-beam and h-type steel piles are suitable for axial compression member or bending member. Ordinary I-beam, light I-beam and HW, HN-shaped steel compared to the same weight, w, ix, iy not as good as H-beam

RELATED PRODUCTS

av无码在线观看 | 女大学生一级毛片免费视频 | 少妇高潮a 6 2v久A片免费 | 中文字幕精品无码一区二区 | 天堂AV天然素人天堂AV | 国产成人永久免费视频 | 中文字幕在线观看不卡综合一区 | 欧美性生交XXXXX久久久 | 丰满的岳 理论片91社 | 国产又粗又黄视频 | 99蜜桃臀精品视频在线观看 | 亚洲中字无码三级片在线观看 | 久久精品一区二区三区四区毛片 | 蜜桃在线一区二区 | 9I精一区二区三区 | 美女露人摸亚洲人小视频红桃 | 啦啦啦欧美成人免费观看 | 欧美XXXX18性欧美护士 | 手机看片福利永久免费一二三四 | 男女真人无遮挡XX00视频链接 | 老太婆色黄A片免费视频 | 国产精品免费无遮挡无码永久视频 | 亚洲成人视频在线观看 | 国产黄色无码视频 | 欧美色图亚洲综合 | 香蕉AV777XXX色综合一区 | 中年女偷情内射熟女啪啪精品 | 欧一美一性一交一乱一乱一视频 | 日韩sm大片免费在线观看 | 蜜桃AV秘 一区二区三区 | 一乃葵av在线播放网站 | 欧美精品久久久久久 | 麻豆AV一区二区三区 | 美女露人摸亚洲人小视频红桃 | 人成视频在线播放 | 日本视频在线观看专区 | 国产精品视频一区福利 | 欧美性猛交XXXX乱大交3,痴汉电车 | 精品欧美黑人一区二区三区 | 99热成人精品热久久66 | 亚洲日韩丝袜熟女变态 |